ALL OUR "STAINLESS STEEL ELECTROPOLISHING" RANGE
Applied in immersion, our stainless steel electropolishing products make surfaces shiny and free of contamination while improving their roughness.
STAINLESS STEEL POLISHING ELECTROLYTES
OUR RANGE OF STAINLESS STEEL POLISHING ELECTROLYTES
Discover our entire range of ready-to-use polishing electrolytes for stainless steels.
Do not hesitate to contact us to find the product that best suits your needs.
>>Stainless steel electropolishing bath Aupus 912 A
>>Stainless steel electropolishing bath Aupus 912 AM
>>Stainless steel electropolishing bath Aupus E 268 I
>>Aupus E 269 I stainless steel electropolishing bath
The Aupus 912 A POLISHING ELECTROLYTE
Aupus 912 A is effective for theelectropolishing of austenitic stainless steels. The use of AUPUS 912 A polishing agent allows to obtain a high degree of brightness with a shorter treatment time and a reduction of metal removal. In addition, it is particularly suitable for the treatment of thin and large parts, since the polishing parameters remain stable.
Availability: 35 KG (20 L) can / 350 KG (200 L) drum / 1100KG (630 L) container
The Aupus 912 AM POLISHING ELECTROLYTE
THE MOST ECONOMICAL
Aupus 912 AM is an effective product for electro-polishing ferritic, martensitic and austenitic stainless steels. Used fordeburring, it allows to obtain bright, smooth surfaces. Thanks to the low material removal, the electrolyte consumption is reduced by 30%. The cost of waste is therefore considerably reduced. In addition, productivity on automatic processing lines is significantly increased thanks to the greater loading of parts on the scales.
Availability: Can 35 KG (20 L) / Drum 350 KG (200 L) / Container 1100KG (630 L)
The Aupus E 268 I POLISHING ELECTROLYTE
Effective for electro-polishing ferritic, martensitic and austenitic stainless steels, Aupus E 268 I is also recommended for electro-polishing nickel-based stainless steels. Widely used for deburring, it provides bright and smooth surfaces. In addition, the polishing parameters remain stable.
Availability: 35 KG (20 L) can / 350 KG (220 L) drum / 1100KG (630 L) container
The Aupus E 269 I POLISHING ELECTROLYTE
Aupus E 269 I is an effective product for the electropolishing of ferric, martensitic and austenitic stainless steels, duplex steels and special steels. Used for deburring, Aupus E 269 I allows more precisely to obtain bright and smooth surfaces. Its application allows a high degree of brightness to be achieved with a shorter processing time and reduced metal removal.Ferritic steel, in particular, obtains a better brightness even at low temperatures (> 50°C).
Availability: 35 KG (20 L) can / 350 KG (220 L) drum / 1100KG (630 L) container